Q-Shield 30-C-Digital Smart Wrench Wi-Fi-3 to 30 Nm
Whether your process require manual tightening operation, torque checking or quality check operation, with or without full reporting , the Desoutter QShield digital wrench is designed to to error proof your operation. The robust features a long life Li-ion battery, gyroscope, Yield detection and a double bridge strain gauge to provide full traceability, irrespective of the operator or process.
This product is a part of Q-Shield - C- Smart Connected Wrench
Design & Functions
Subfamily
Digital torque wrenches
Type class
Type I, Class 3
Compliance
ISO 6789:2017
Battery type
Lithium-ion
Power supply
3500 mAh Battery
Drive (in)
0.35x0.47
Angle measure
Yes
Feedback type
RGB Backlight wrench display and handle Vibration
Angle accuracy (%)
1% from 3°/s to 250°/s angular speed (2,5% from 1,2° to 3°/s) %
Output drive size (in)
3/8
Output drive type
Sq
Weight
1.72 lb
Battery capacity
3.5 Ah
Overload torque
26.6 ft.lbf
Tightening direction
CW and CCW
Max torque
22.1 ft.lbf
Min torque
2.2 ft.lbf
Tightening strategies
Yes
Side to Center
0.89 in
Lever arm length
12.6 in
Unit measurement supported
N.m, lbs.ft, lbs.in, oz.ft, oz.in, kgf.m, kgf.cm, k.pm, d.Nm, degree
Length without ratchet
15.83 in
Quality strategies
Yes
Accuracy (ID accuracy_measurement tool) (%)
±1% on torque reading value from 10% to 100% of nominal torque (CW and CCW)
Autonomy (h)
8h connected/10h in standalone
Curves memory capacity
25
Communicating
Yes
Results memory capacity
1000 (99 on display)
End-fitting management
Yes
Max Ambient Operating Temperature
140 ºF
Min Ambient Operating Temperature
14 ºF
Communication type
WIFI 2.4 & 5 Ghz - IEEE 802.11a/b/g/n
Resources
Find technical documentations and documents relative to this product
Identification
Technical drawings
User manuals
