Q-Shield 200-C-Digital Smart Wrench Wi-Fi-20 to 200 Nm
Whether your process require manual tightening operation, torque checking or quality check operation, with or without full reporting , the Desoutter QShield digital wrench is designed to to error proof your operation. The robust features a long life Li-ion battery, gyroscope, Yield detection and a double bridge strain gauge to provide full traceability, irrespective of the operator or process.
This product is a part of Q-Shield - C- Smart Connected Wrench
Design & Functions
Family
Manual torque wrenches
Subfamily
Digital torque wrenches
Type class
Type I, Class 3
Compliance
ISO 6789:2017
Battery type
Lithium-ion
Power supply
3500 mAh Battery
Angle measure
Yes
Feedback type
RGB Backlight wrench display and handle Vibration
Angle accuracy (%)
1% from 3°/s to 250°/s angular speed (2,5% from 1,2° to 3°/s)
Output drive type
Sq
Tightening direction
CW and CCW
Tightening strategies
Yes
Unit measurement supported
N.m, lbs.ft, lbs.in, oz.ft, oz.in, kgf.m, kgf.cm, k.pm, d.Nm, degree
Quality strategies
Yes
Accuracy (ID accuracy_measurement tool) (%)
±1% on torque reading value from 10% to 100% of nominal torque (CW and CCW)
Curves memory capacity
25
Communicating
Yes
Results memory capacity
1000 (99 on display)
End-fitting management
Yes
Communication type
WIFI 2.4 & 5 Ghz - IEEE 802.11a/b/g/n
Size & Weight
Drive (in)
0.55x0.71
Output drive size (in)
1/2
Weight
3.71 lb
Side to Center
0.89 in
Lever arm length
21.73 in
Length without ratchet
24.69 in
Power & Battery
Battery capacity
3.5 Ah
Autonomy (h)
8h connected/10h in standalone
Torque
Overload torque
177 ft.lbf
Max torque
148 ft.lbf
Min torque
14.8 ft.lbf
storage
Max Ambient Operating Temperature
140 ºF
Min Ambient Operating Temperature
14 ºF
Resources
Find technical documentations and documents relative to this product
Identification
Technical drawings