Q-Shield 400-C-Digital Smart Wrench Wi-Fi-40 to 400 Nm
Whether your process require manual tightening operation, torque checking or quality check operation, with or without full reporting , the Desoutter QShield digital wrench is designed to to error proof your operation. The robust features a long life Li-ion battery, gyroscope, Yield detection and a double bridge strain gauge to provide full traceability, irrespective of the operator or process.
This product is a part of Q-Shield - C- Smart Connected Wrench
Design & Functions
End-fitting management
Yes
Family
Manual torque wrenches
Compliance
ISO 6789:2017
Output drive type
Sq
Unit measurement supported
N.m, lbs.ft, lbs.in, oz.ft, oz.in, kgf.m, kgf.cm, k.pm, d.Nm, degree
Subfamily
Digital torque wrenches
Type class
Type I, Class 3
Battery type
Lithium-ion
Power supply
3500 mAh Battery
Angle measure
Yes
Feedback type
RGB Backlight wrench display and handle Vibration
Angle accuracy (%)
1% from 3°/s to 250°/s angular speed (2,5% from 1,2° to 3°/s)
Tightening direction
CW and CCW
Tightening strategies
Yes
Communication type
WIFI 2.4 & 5 Ghz - IEEE 802.11a/b/g/n
Size & Weight
Drive (in)
0.55x0.71
Output drive size (in)
3/4
Side to Center
0.89 in
Weight
7.24 lb
Lever arm length
37.8 in
Length without ratchet
40.47 in
Power & Battery
Battery capacity
3.5 Ah
Torque
Overload torque
354 ft.lbf
Max torque
295 ft.lbf
Min torque
29.5 ft.lbf
Resources
Find technical documentations and documents relative to this product
Identification
Technical drawings